ESX®-LTplus Print
Information - english
  ESX-LTplus Datasheet (english)
Information - german
  ESX-LTplus Datasheet (german)

esx-ltplus_logoesx-ltplus

Short Description

The ESX®-LTplus is  a recent development of the Sensor-Technik Wiedemann Group. It is a 16 Bit based controller, which is qualified for applications under the rough conditions in off highway vehicles and mobile machines.

The freely programmable electronic control unit offers a large number of inputs and outputs in in a compact housing. As with the ESX® and ESX®-LT, the housing is die-cast aluminium.


Technical Data

Processor System
Processor 16 Bit controller, 40 MHz
SRAM 512 kByte
Flash 1 MByte
EEPROM/FRAM 8 kByte

Interfaces
CAN-bus 1st CAN, optional 2nd CAN, 2.0 B (11 bit and 29 bit identifier), full CAN, Low-/High-Speed up to 1 MBit/s

In-/Outputs (max. 136)
Analog/digital inputs max. 24, additional voltage inputs 0 ... 32 V, optional 0 ... 10 V, short circuit protected
RPM inputs max. 4 RPM inputs, cut-off-frequency 8.9 kHz, short circuit
Current inputs 8 analoge current inputs, 4 ... 20 mA, short circuit protected
Digital/PWM outputs with current measurement max. 4 x 4 A, high side switch, 0 ... 100 % PWM, short circuit protected
Digital/PWM outputs max. 20 x 4 A, high side switch, 0 ... 100 % PWM, short circuit protected
max. 8 x 3 A, low side switch, short circuit portected
PVG outputs max. 4 PVG outputs, proportional valve control
Constant voltage output 10 V, stabilized voltage supply, short circuit protected
ID pins max. 2 pins for position identificationing, short circuit protected

System Data
Voltage supply 9 V ... 32 V DC
Current consumption approx. 0.5 A without active outputs, stand-by < 1 mA, total current max. 30 A

Mechanical Data
Connector 42 pol. automotive connector (AMP)
Chassic IP65 (optional IP67), die-cast aluminium, GORE-TEX®-breathing filter for pressure equalization, moisture protected
Weight approx. 1.0 kg (2.2 lbs)
Size approx. 154 mm x 169 mm x 52 mm (ca. 6.06“ x 6.65“ x 4.05“)

Environmental Requirements
Standards According to automotive, agricultural and construction industry satandards, CE-conformity
Operating temperature -40°C ... +85°C (-40°F ... 185°F) (chassic temperature)


Block Diagram

blockdiagram_esx-ltplus