ESX-C2C Datasheet (english) ESX-C2C Datasheet (german)
Short Description
The ESX®-C2C teleservice module is used in vehicles and mobile machines, for example in agricultural, construction, industrial and municipal vehicles, where rough conditions and extreme environmental conditions are normal. Like all of the ESX® product family, inputs and outputs are freely programmable. With the RS232- and CAN-Bus ports bridge- and gateway functions are readily implemented. Additionally, remote software updates of the vehicle control systems can be achieved via the ESX®-C2C system.
Individually time stamped CAN messages and signals are captured and can be transferred via GSM/GPRS and for example be made available via the internet. Further options are GPS and Bluetooth modules.
The STW Group provides firmware for the ESX®-C2C that enables monitoring and data logging systems to be implemented without additional programming. Users, service team and manufacturers of machines all have individual access rights, ensuring the integrity and safety of the vehicle network. Tele-diagnosis, automatic monitoring of work flows, navigation tasks, and performance management of machines are all feasible with ESX®-C2C hardware and software packages.
With the ’Quad-Band’ modem, manufacturer of machines are able to offer a world wide teleservice system for their vehicles
Technical Data
| In-/ Outouts (max. 5) | ESX-C2C-Variation | ||
| I/O-Variant | A | B | C |
| Analog inputs,0 ... 300, fmax 200 Hz, short circuit protected | 2 | 3 | 4 |
| RPM input fmax=5,7 kHz, diagnosable, short circuit protected | 1 | 0 | 0 |
| PWM outputs 1,5 A high side switch, 0 ... 100%, diagnosable, short circuit protected | 2 | 2 | 1 |
Communication |
|||
| GSM (Q-band / GPRS / EDGE compatible) | optional | ||
| Bluetooth (Class 2) | optional | ||
| 2x CAN | CAN 2.0 B (11 and29 Bit Identifier), Low-/High-Speed up to 1 MBit/s | ||
| 2x RS232 | Serial interface with progammable Watchdog | ||
Processor System |
|||
| Processor | 16 Bit Controller, programmable Watchdog | ||
| SRAM | 512 kByte | ||
| Flash | 1 MByte application software memory,1 MByte data memory | ||
| EEPROM | 4 kByte | ||
| GPS12 Kanal SBAS support(WAAS / EGNOS / MSAS) | optional | ||
| RTC2 kByte battery backet RAM, Li-Batt. (15 years), Wake-up-Function | optional | ||
| Signal LEDs | 6 programmable status LEDs | ||
System Data |
|||
| Voltage supply | 9 ... 32 VDC | ||
| Current requirements | Stand-by <0,5 mARTC Wake-up mode approx. 4 mABetrieb approx. 300 mA (without load) | ||
Mechanical Data |
|||
| Connector | 16pol. automotive type (AMP) | ||
| Chassic | IP 65, die-cast aluminium, GORE-TEX breathing filter for pressure equalization and high moisture protection | ||
| Weight | approx. 5 kg (1.1 lbs) | ||
| Size | approx. 97 mm x 125 mm x 45 mm (38.1" x 49.2" x 17,7") | ||
Environmental Requirements |
|||
| Protection class | IP 65 | ||
| Temperature range | -40°C ... 85°C chassic temperature with GSM:-30°C ... 65°C chassic temperature with Bluetooth: -20°C ... 55°C chassic temperature |
||
| Standards | According to automotive, agricuultural and constructing industry standards; CE-Confirmity; E1-accredition of Federal Bureau of Motor Vehicles and Drivers | ||
